LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Brakes - Rear) >> Specifications >> Disc Brake Component Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disc Brake Component Specifications

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
DISC BRAKE COMPONENT SPECIFICATIONS TABLE

Application Specification
Metric English
Rear Brakes
Brake Pad Lining Minimum Thickness 2.0 mm 0.080 in
Brake Rotor Diameter 191 mm 7.520 in
Rotor Discard Thickness (1) 18.4 mm 0.724 in
Maximum Allowable Lateral Runout 0.06 mm 0.002 in
Maximum Allowable Scoring 1.50 mm 0.059 in
Maximum Allowable Thickness Variation 0.025 mm 0.001 in
(1) All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications.
scientia non olet · About LEMON Manuals