Installation Procedure
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Position the shock to the vehicle.CAUTION: Refer to FASTENER NOTICE .
- Install the upper shock bolt.
Tightening torque
Tighten the bolt to 110 N.m (81 lb ft).
- Install the lower shock bolt and nut.
Tightening torque
Tighten the bolt to 110 N.m (81 lb ft).
- Install the rear wheelhouse to the vehicle. Refer to REAR WHEELHOUSE LINER PANEL REPLACEMENT .
- Install the rear tire and wheel assembly. Refer to INSTALLATION PROCEDURE .
- Lower the vehicle.