Rear Toe Adjustment
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the suspension adjustment link-to-frame fastener enough to allow for movement.NOTE: The frame of the vehicle is slotted, a cam nut is available for service if required.
- Rotate the suspension adjustment link cam nut in the direction necessary to correct the toe angle.
- Snug the suspension adjustment link-to-frame fastener, do not tighten at this time.
- Reinspect the rear toe specifications and adjust as necessary.CAUTION: Refer to FASTENER NOTICE .
- Hold the nut and tighten the link-to-frame fastener bolt.
Tightening torque
Tighten the bolt to 110 N.m (81 lb ft).
- Repeat the procedure for the other rear wheel.