Rear Camber Adjustment
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the upper control arm-to-frame fastener enough to allow movement.NOTE: The frame of the vehicle is slotted, turning the cam nut will move the camber in to the designated location.
- Rotate the upper control arm-to-frame fastener in the direction necessary to the correct the camber measurement.
- Snug the upper control arm-to-frame fastener, do not tighten at this time.
- Reinspect the rear camber specifications and adjust as necessary.CAUTION: Refer to FASTENER NOTICE .
- Hold the nut and tighten the upper control arm-to-frame bolt.
Tightening torque
Tighten the bolt to 110 N.m (81 lb ft).
- Repeat the procedure for the other rear wheel.