Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
Remove the rear tire and wheel assembly. Refer to REMOVAL PROCEDURE .
Disconnect the anti-lock brake system (ABS) brake wiring harness from the upper control arm.
Remove the rear brake hose routing nut and bolt.

Fig 1: Upper Control Arm To Knuckle Nut & Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Remove the upper control arm to knuckle nut and bolt.

Fig 2: Upper Control To Support Bolt & Cam Nut
Courtesy of SUZUKI OF AMERICA CORP.
Remove the upper control to support cam nut and bolt.
Remove the upper control arm.