Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Reinforcement, Reinforcement Bolts & Rear Frame To Body Bolts

Courtesy of SUZUKI OF AMERICA CORP.

Position the reinforcement (1) to the vehicle.
Loosely install NEW rear frame to body bolts (2).
Loosely install the reinforcement bolts (3).
CAUTION: Refer to FASTENER NOTICE .
Tighten the reinforcement bolts (3).
Tightening torque

Tighten the bolts to 50 N.m (37 lb ft).
Tighten the frame to body bolts (2).
Tightening torque

Tighten the bolts to 155 N.m (114 lb ft).
Remove the utility stand from the frame.
Lower the vehicle.