Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Refer to GASOLINE/GASOLINE VAPORS CAUTION .

WARNING:

Remove the fuel tank cap and relieve the fuel system pressure before servicing the fuel system in order to reduce the risk of personal injury. After you relieve the fuel system pressure, a small amount of fuel may be released when servicing the fuel lines, the fuel injection pump, or the connections. In order to reduce the risk of personal injury, cover the fuel system components with a shop towel before disconnection. This will catch any fuel that may leak out. Place the towel in an approved container when the disconnection is complete.

Fig 1: Identifying Fuel Pressure Gauge (1 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

Relieve the fuel system pressure. Refer to FUEL PRESSURE RELIEF (WITH J 34730-1A) and FUEL PRESSURE RELIEF (WITHOUT J 34730-1A) .
Remove the shop towel from around the fuel rail service port, and place in an approved gasoline container.
Perform any tests and/or diagnostics as needed. For the proper usage of the J 34730-1A, refer to the manufacture's directions.