Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Brake Rotor

Courtesy of SUZUKI OF AMERICA CORP.

Remove the front brake rotor. Refer to FRONT BRAKE ROTOR REPLACEMENT .

Fig 2: Identifying Wheel Speed Sensor Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect the wheel speed sensor electrical connector, if equipped.

Fig 3: Removing Wheel Speed Sensor Electrical Connector From Connector Bracket
Courtesy of SUZUKI OF AMERICA CORP.
Remove the wheel speed sensor electrical connector from the connector bracket.

Fig 4: Identifying Front Wheel Drive Shaft Spindle Nut
Courtesy of SUZUKI OF AMERICA CORP.
Remove the front wheel drive shaft spindle nut.
Remove the speed sensor. Refer to FRONT WHEEL SPEED SENSOR REPLACEMENT .

Fig 5: Identifying Wheel Drive Shaft
Courtesy of SUZUKI OF AMERICA CORP.
Support the wheel drive shaft with heavy mechanic's wire or equivalent.
Remove and discard the wheel bearing/hub mounting bolts.
Remove the wheel bearing/hub assembly from the steering knuckle.