Rear Output Shaft Housing Removal

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Output Shaft Housing Components

Courtesy of SUZUKI OF AMERICA CORP.

CALLOUT AND COMPONENT NAME TABLE

Callout	Component Name
1	Transfer Case Rear Output Shaft Housing Bolt (Qty: 6)
2	Transfer Case Rear Output Shaft Housing Tip: Locate 2 screwdrivers or prybars to the flange area of the housing to ease removal. Special Tools J 25070 Heat Gun - 500-750F
3	Transfer Case Rear Output Shim
4	Transfer Case Rear Output Shaft Housing Seal O-Ring Tip: Discard the O-ring after removal.