Seat Belt Height Adjuster Replacement - Front

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Seat Belt Height Adjuster Bolt

Courtesy of SUZUKI OF AMERICA CORP.

CALLOUT COMPONENT NAME

Callout	Component Name
Preliminary Procedure Remove the front seat belt adjuster cover. Remove seat belt guide loop bolt. Refer to SEAT BELT RETRACTOR PRETENSIONER REPLACEMENT - FRONT . Remove the center pillar upper garnish molding. Refer to CENTER PILLAR UPPER GARNISH MOLDING REPLACEMENT .
1	Front Seat Belt Height Adjuster Bolt (Qty: 2) Tip: Apply Permatex® 24200 on all restraint fasteners prior to installation. Tightening torque 40 N.m (30 lb ft). CAUTION: Refer to FASTENER NOTICE .
2	Front Seat Belt Height Adjuster Assembly