LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Sun Roof/T Top/Convertible Top) >> Repair Instructions >> Sunroof Module Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the aid of an assistant, position the new sunroof module into the roof opening.
  2. Install the bolts which secure the sunroof module to the roof and tighten the bolts by hand.
  3. Place a 12 mm (0.47 in) pin into the sunroof module alignment holes.
    CAUTION: Refer to FASTENER NOTICE .
  4. Remove the alignment pins.

    Tightening torque 

    Tighten the bolts to 8 N.m (70 lb in). 

  5. Install the front and rear sunroof drain hoses. Refer to Installation Procedure  and Installation Procedure .
  6. Connect the electrical connectors to the sunroof module.
  7. Secure the harness to the sunroof module.
  8. Adjust the sunroof window. Refer to SUNROOF WINDOW HEIGHT AND OPENING FIT ADJUSTMENT .
  9. Verify the proper operation of the sunroof before installing the headliner.
  10. Install the headliner. Refer to HEADLINING TRIM PANEL REPLACEMENT .
scientia non olet · About LEMON Manuals