Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

If necessary, perform the following steps:
- Assemble the cylinder head. Refer to CYLINDER HEAD ASSEMBLE .
- Install the camshaft. Refer to CAMSHAFT INSTALLATION - RIGHT SIDE .
- Install the exhaust manifold to the cylinder head. Refer to EXHAUST MANIFOLD INSTALLATION - RIGHT SIDE .
  
  Fig 1: Identifying Cylinder Head Gasket
  Courtesy of SUZUKI OF AMERICA CORP.
Install a NEW cylinder head gasket.

Fig 2: Identifying Cylinder Head
Courtesy of SUZUKI OF AMERICA CORP.
Carefully install the cylinder head with the exhaust manifold to the engine. Refer to CYLINDER HEAD INSTALLATION - RIGHT SIDE .
Install the right bank secondary timing chain. Refer to INSTALLATION PROCEDURE .
Install the engine. Refer to INSTALLATION PROCEDURE .