Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Left Intake Camshaft Position Actuator

Courtesy of SUZUKI OF AMERICA CORP.

Locate the intake camshaft position actuator to the camshaft and loosely install the bolt.
CAUTION: Refer to TORQUE REACTION AGAINST TIMING DRIVE CHAIN NOTICE .

NOTE: Use an open-end wrench at the camshaft hex to prevent camshaft/engine rotation.
Tighten the camshaft position actuator bolt. Refer to CAMSHAFT POSITION ACTUATOR INSTALLATION - LEFT SIDE INTAKE (THIRD DESIGN) and CAMSHAFT POSITION ACTUATOR INSTALLATION - LEFT SIDE INTAKE (FOURTH DESIGN) .
Install the left exhaust camshaft actuator. Refer to INSTALLATION PROCEDURE .