Camshaft Position Actuator Removal - Right Side Intake (Third Design)

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: CAMSHAFT POSITION ACTUATOR REMOVAL - RIGHT SIDE EXHAUST (THIRD DESIGN) .

Fig 1: Identifying Right Intake Camshaft Position Actuator & Bolt

Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Refer to TORQUE REACTION AGAINST TIMING DRIVE CHAIN NOTICE .

Use an open wrench on the hex cast into the camshaft in order to prevent engine rotation when loosening the camshaft position actuator bolt.
Remove the right intake camshaft position actuator bolt.
Remove the right intake camshaft position actuator.

Reference: CAMSHAFT TIMING DRIVE COMPONENTS CLEANING AND INSPECTION (THIRD DESIGN) .