LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Engine Mechanical) >> Repair Instructions >> Camshaft Intermediate Drive Chain Idler Installation - Right Side (Third Design)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Intermediate Drive Chain Idler Installation - Right Side (Third Design)

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Right Camshaft Intermediate Drive Chain Idler
G04842225Courtesy of SUZUKI OF AMERICA CORP.
  1. Ensure that the right camshaft intermediate drive chain idler (1) is being installed. The recessed hub (4) and the smaller sprocket of the right camshaft intermediate drive chain idler is installed outward. The raised hub and the larger sprocket of the right camshaft intermediate drive chain idler is installed towards the block.
    Fig 2: Identifying Camshaft Intermediate Drive Chain Idler & Bolt
    G04842226Courtesy of SUZUKI OF AMERICA CORP.
  2. Install the right camshaft intermediate drive chain idler.
    CAUTION: Refer to FASTENER NOTICE .
  3. Install the camshaft intermediate drive chain idler bolt.

    Tightening torque 

    Tighten the camshaft intermediate drive chain idler bolt to 58 N.m (43 lb ft)  .

    Reference: PRIMARY CAMSHAFT DRIVE CHAIN INSTALLATION (THIRD DESIGN) .

scientia non olet · About LEMON Manuals