Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Disconnecting Engine Wiring Harness Electrical Connector

Courtesy of SUZUKI OF AMERICA CORP.

Remove the air cleaner outlet duct. Refer to REMOVAL PROCEDURE .
Disconnect the engine wiring harness electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.

Fig 2: Identifying Air Cleaner Assembly (1 Of 2)
Courtesy of SUZUKI OF AMERICA CORP.
Remove the air cleaner bolt.
Disengage the air cleaner pins from the front panel and remove the air cleaner assembly.
If replacing the air cleaner assembly, remove the MAF/IAT sensor. Refer to REMOVAL PROCEDURE .