LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Propeller Shaft) >> Repair Instructions >> Propeller Shaft Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the transmission in neutral.
  2. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  3. Mark the relationship of the propeller shaft to the rear differential drive flange and the transfer case.
  4. Support the propeller shaft at the rear differential.
  5. Remove the mounting bolts for the propeller shaft at the rear differential drive flange.
    Fig 1: Removing Mounting Bolts For Propeller Shaft At Rear Differential Drive Flange
    G04842875Courtesy of SUZUKI OF AMERICA CORP.
  6. Support propeller shaft at the transfer case.
  7. Remove the mounting bolts for the propeller shaft at the transfer case.
    Fig 2: Removing Mounting Bolts For Propeller Shaft At Transfer Case
    G04842876Courtesy of SUZUKI OF AMERICA CORP.
  8. Support the propeller shaft at the center support bearing.
    Fig 3: Identifying Center Support Bearing Mount
    G04842877Courtesy of SUZUKI OF AMERICA CORP.
  9. Remove the mounting bolts for the center support bearing.
  10. With the aide of an assistant, remove the propeller shaft from the vehicle.
scientia non olet · About LEMON Manuals