Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Drain the cooling system. Refer to DRAINING AND FILLING COOLING SYSTEM (LY7 GE 47716 FILL) and DRAINING AND FILLING COOLING SYSTEM (LY7 STATIC FILL) .
Remove the drive belt. Refer to REMOVAL PROCEDURE .

Fig 1: Retaining Water Pump Pulley
Courtesy of SUZUKI OF AMERICA CORP.
Use the EN 46104 in order to retain the water pump pulley.

Fig 2: Identifying Water Pump Pulley Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Remove the water pump pulley bolts.
Remove the water pump pulley.

Fig 3: Identifying Water Pump Seal & Water Pump Bolts (1 Of 2)
Courtesy of SUZUKI OF AMERICA CORP.
Remove the water pump bolts.
Remove the water pump.
Remove and DISCARD the water pump seal.
Carefully clean the water pump sealing surfaces.