Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Brake Fluid Level Sensor To Master Cylinder

Courtesy of SUZUKI OF AMERICA CORP.

While noting the proper orientation, install the brake fluid level sensor to the master cylinder.
Press the brake fluid level sensor firmly into the master cylinder reservoir, ensuring that the retaining tabs are fully engaged.

Fig 2: Connecting Brake Fluid Level Sensor Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.
Connect the brake fluid level sensor electrical connector.
Install the underhood electrical center. Refer to UNDERHOOD ELECTRICAL CENTER OR JUNCTION BLOCK REPLACEMENT .