Component Testing
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the applicable door lock switch.
- Test for infinite resistance between the signal terminals U and L and the ground terminal C with the switch in the at rest position.
- If less than infinite resistance, replace the applicable door lock switch.
- Test for less than 2 Ω of resistance between the signal terminal L and the ground terminal C with the switch in the lock position.
- If greater than 2 Ω, replace the applicable door lock switch.
- Test for less than 2 Ω of resistance between the signal terminal U and the ground terminal C with the switch in the unlock position.
- If greater than 2 Ω, replace the applicable door lock switch