Scan Tool Output Controls - Displays and Gauges
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
BODY CONTROL MODULE (BCM) CONNECTOR TERMINAL INFORMATION
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Interior Lamps | Output Control/Lamp Test | The body control module (BCM) turns the interior lamps ON when you select ON. The interior lamps should stay ON until commanded OFF. |
| I/P Illumination Lamps | Output Control/Lamp Test | The BCM turns the instrument panel illumination lamps on when you select ON. The illumination lamps should stay on until commanded OFF. |
| Transmission Range Indicator | Output Control/Lamp Test | The BCM turns the PRNDL indicators ON when you select ON. The PRNDL should stay ON until commanded OFF. |
INSTRUMENT PANEL CLUSTER (IPC) - CONNECTOR TERMINAL INFORMATION
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Lamp and Gauge Check | - | The instrument panel cluster (IPC) illuminates the following indicators when you select ON:
The IPC drives the following gauges to maximum position when you select ON:
The indicators should stay illuminated and all gauges remain at maximum until commanded OFF. When commanded OFF, the indicators should turn OFF and all gauges should remain at the minimum position until the test is exited or commanded ON. |