LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Instrumentation/Driver Info./Horn) >> Diagnostic Information and Procedures >> Fog Lamp Indicator Inoperative >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the fog lamp switch.
  2. Ignition OFF, test for less than 1 Ω of resistance between the ground circuit and ground.
    • If greater than 1 Ω, test the ground circuit for an open/high resistance.
  3. Verify the scan tool fog lamp switch parameter is OFF.
    • If the fog lamp switch parameter is not indicating OFF, test the signal circuit for a short to ground.
  4. Install a 3-amp fused jumper wire between the signal circuit and ground. Verify the scan tool fog lamp switch parameter is ON.
    • If the fog lamp switch parameter is not indicating ON, test the signal circuit of the fog lamp switch for a short to voltage or an open/high resistance.
  5. If all circuits test normal, test or replace the fog lamp switch.
scientia non olet · About LEMON Manuals