LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Instrumentation/Driver Info./Horn) >> Diagnostic Information and Procedures >> Engine Oil Pressure Indicator Always On >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, engine ON, verify the scan tool Engine Oil Pressure Switch parameter is Low.
    • If not Low, replace the instrument panel cluster (IPC).
  2. Ignition OFF, disconnect the harness connector at the EOP switch.
  3. Ignition ON, verify the scan tool Engine Oil Pressure Switch parameter is OK.
    • If not OK, test the signal circuit of the EOP switch for a short to ground. If the circuit tests normal, replace the ECM.
  4. If all circuits test normal, test or replace the EOP sensor.
scientia non olet · About LEMON Manuals