Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Transmission Mount & Transmission Mount-To-Frame Bolts

Courtesy of SUZUKI OF AMERICA CORP.

Install and position the transmission mount (1).
CAUTION: Refer to FASTENER NOTICE .
Install the transmission mount-to-frame bolts (3).
Tightening torque

Tighten the bolt to 50 N.m (37 lb ft) .
Install the transmission mount-to-bracket through bolt (2), while aligning the transmission mount to the bracket.
Tightening torque

Tighten the bolt to 110 N.m (81 lb ft) .

Fig 2: Identifying Stabilizer Links
Courtesy of SUZUKI OF AMERICA CORP.
Lower the stabilizer shaft and connect the stabilizer links.
Tightening torque

Tighten the stabilizer link nuts to 65 N.m (48 lb ft) .
Lower the vehicle.