Manual Shift Shaft Seal and Bearing Installation

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: MANUAL SHIFT SHAFT SEAL AND BEARING REMOVAL .

Special Tool

J 45161 Manual Shift Shaft Bearing Replacer

Fig 1: Installing Manual Shift Shaft Bearing

Courtesy of SUZUKI OF AMERICA CORP.

Using J 45161 and a hammer, install the manual shift shaft bearing (714) into the transmission case assembly until J 45161 is flush with the case bore.

Fig 2: Identifying Manual Shift Shaft Seal
Courtesy of SUZUKI OF AMERICA CORP.
Install the manual shift shaft seal (713) by pressing the seal into the case bore by hand.

Reference: OUTPUT GEAR ASSEMBLY INSTALLATION .