Case Cover and 1-2 Reverse Clutch Assembly Removal

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: THIRD GEAR BAND SERVO PISTON ASSEMBLY REMOVAL .

Fig 1: Identifying Transmission Case Cover Bolts

Courtesy of SUZUKI OF AMERICA CORP.

Remove the 12 transmission case cover bolts/screws.

Fig 2: Removing Transmission Case Cover & 1-2 Reverse Clutch Assembly
Courtesy of SUZUKI OF AMERICA CORP.

NOTE: Do not damage the transmission case cover.
Remove the transmission case cover and 1-2 reverse clutch assembly (19) with a plastic hammer if needed.

Fig 3: Identifying Case Fluid Passage Seals
Courtesy of SUZUKI OF AMERICA CORP.

NOTE: Do not damage the transmission case sealing surface.
Remove the 5 case fluid passage seals (86) from the transmission case.
Reference: CASE COVER ASSEMBLY DISASSEMBLE .

Reference: 1-2 REVERSE CLUTCH DISASSEMBLE .