Component Testing

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Static Test

Ignition OFF, disconnect the 22-way automatic transmission (AT) wiring harness connector (C2) at the TCM.
Disconnect the automatic transmission (AT) wiring harness connectors at the valve body (V/B).
Place the TFT sensor in water with a temperature of 10°C. Test for 5.80 - 7.09K ohms of resistance between the TFT sensor high signal circuit terminal 14 and low signal circuit terminal 13.
- If not within the specified range, replace the AT wiring harness, refer to WIRING HARNESS REMOVAL procedure and WIRING HARNESS INSTALLATION procedure.
Place the TFT sensor in water with a temperature of 110°C. Test for 0.231 - 0.263K ohms of resistance between the TFT sensor high signal circuit terminal 14 and low signal circuit terminal 13.
- If not within the specified range, replace the AT wiring harness, refer to WIRING HARNESS REMOVAL procedure and WIRING HARNESS INSTALLATION procedure.