Component Testing
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Multifunction/Headlamp Switch Testing
- Ignition OFF, disconnect the harness connector at the headlamp switch, terminal C1 pins 4 and 2.
- Test for infinite resistance between the signal terminal and the voltage supply terminal with the switch in the open position.
- If less than infinite resistance, replace the headlamp switch, replace the whole multifunction switch.
- Test for less than 1.5 ohms between the signal terminal and the high voltage supply terminal with the switch in the closed position.
- If greater than the specified range, replace the headlamp switch, replace the whole multifunction switch.