With SDT
- Start engine.
- Select "Data list" mode with SDT.
- Press MAIN switch and make sure that CRUISE indicator lights up.
- Drive the vehicle for at least 5 consecutive seconds under the following condition.VEHICLE SPEED SPECIFICATION
VHCL SPEED SE More than 30 km/h (19 MPH) Shift lever Suitable position - Check DTC.
- If DTC is detected, go to
[Diagnosis Procedure ].
If DTC is not detected, go to the following steps.
- Drive the vehicle for at least 5 consecutive seconds under the following condition.VEHICLE SPEED SPECIFICATION
VHCL SPEED SE More than 30 km/h (19 MPH) Shift lever Suitable position Driving location Depress the brake pedal for more than 5 seconds so as not to come off from the above mentioned vehicle speed. - Check DTC.
- If DTC is detected, go to [Diagnosis Procedure ].