With SDT
- Turn ignition switch OFF and wait at least 10 seconds.
- Turn ignition switch ON.
- Select "Data list" mode with SDT.
- Check that the "COOLAN TEMP/S" indication is between 4 °C (39 °F) and 36 °C (97 °F). If "COOLAN TEMP/S" indication is within the specified value, go to the following steps. If "COOLAN TEMP/S" indication is out of the specified value, cool engine down or warm engine up and go to step 1.
- Start engine and let it idle for 5 minutes.
- Check 1st trip DTC.
- If 1st trip DTC is detected, go to [Diagnosis Procedure ].