LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine General Information & Diagnosis - Qr25DE (2 Of 5) >> DTC P0132: A/F Sensor 1 >> DTC Confirmation Procedure >> With SDT
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With SDT

  1. Start engine and warm it up to normal operating temperature.
  2. Select "A/F SEN1 (B1)" in "Data list" mode with SDT.
  3. Check "A/F SEN1 (B1)" indication.

    If the indication is constantly approx. 5V, go to [Diagnosis Procedure ].

    If the indication is not constantly approx. 5V, go to next step.

  4. Turn ignition switch OFF, wait at least 10 seconds and then restart engine.
  5. Drive and accelerate vehicle to more than 40 km/h (25 MPH) within 20 seconds after restarting engine.
  6. Maintain the following conditions for about 20 consecutive seconds.
    ENGINE SPEED SPECIFICATION

    ENG SPEED 1, 000 - 3, 200 RPM
    VHCL SPEED SE More than 40 km/h (25 MPH)
    B/FUEL SCHDL 1.5 - 9.0 msec
    Shift lever Suitable position
    NOTE:
    • Keep the accelerator pedal as steady as possible during the cruising.
    • If this procedure is not completed within 1 minute after restarting engine at step  4, return to step  4.
  7. Check 1st trip DTC.
  8. If 1st trip DTC is displayed, go to [Diagnosis Procedure ].
scientia non olet · About LEMON Manuals