LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine General Information & Diagnosis - Qr25DE (2 Of 5) >> DTC P0011: IVT Control >> DTC Confirmation Procedure >> With SDT
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With SDT

  1. Start engine and warm it up to the normal operating temperature.
  2. Maintain the following conditions for at least 10 consecutive seconds.

    Hold the accelerator pedal as steady as possible.

    ENGINE SPEED SPECIFICATION

    ENG SPEED 1, 200 - 2, 000 RPM (A constant rotation is maintained.)
    COOLAN TEMP/S More than 60 °C (140 °F)
    B/FUEL SCHDL More than 4.3 msec
    Shift lever P or N (A/T), Neutral (M/T)
  3. Stop vehicle with engine running and let engine idle for 10 seconds.
  4. Check 1st trip DTC.
  5. If the 1st trip DTC is detected, go to [P0011 IVT CONTROL ].

    If the 1st trip DTC is not detected, go to next step.

  6. Maintain the following conditions for at least 20 consecutive seconds.
    ENGINE SPEED SPECIFICATION

    ENG SPEED 1, 200 - 3, 175 RPM (A constant rotation is maintained.)
    COOLAN TEMP/S 70 - 105 °C (158 - 221 °F)
    Shift lever 1st or 2nd position
    Driving location uphill Driving vehicle uphill
    (Increased engine load will help maintain the driving conditions required for this test.)
  7. Check 1st trip DTC.
  8. If the 1st trip DTC is detected, go to [P0011 IVT CONTROL ].
scientia non olet · About LEMON Manuals