Component Inspection

DIAGNOSIS PROCEDURE CHART

Step	Action	YES	NO
1	CHECK SEAT BELT BUCKLE SWITCH Turn ignition switch OFF. Courtesy of SUZUKI OF AMERICA CORP. 2. Disconnect the seat belt buckle switch LH connector. 3. Check continuity between terminals 1 and 2. 1 - 2 When seat belt is fastened: Continuity should not exist. When seat belt is unfastened: Continuity should exist. Is the inspection result normal?	Inspection End.	Replace the seat belt buckle switch LH.

Step

Action

YES

CHECK SEAT BELT BUCKLE SWITCH

Courtesy of SUZUKI OF AMERICA CORP.

Is the inspection result normal?

Inspection End.

Replace the seat belt buckle switch LH.