LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info./Horn >> Diagnostic Information and Procedures >> Meter Diagnosis Description >> Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Procedure

NOTE:
  • Once entered, combination meter self-diagnosis mode will function with the ignition switch in ON or START. Combination meter self-diagnosis mode will exit upon turning the ignition switch to OFF or ACC.
  • If the diagnosis function is activated with trip A displayed, the mileage on trip A is reset to 0000.0. (Trip B operates the same way.)

To initiate combination meter self-diagnosis mode, refer to the following procedure.

  1. Turn the ignition switch ON, while pressing the odometer/trip meter switch for 5 - 8 seconds. When the diagnosis function is activated, the odometer/trip meter will display tESt.
    NOTE: Check combination meter power supply and ground circuit when self-diagnosis mode of combination meter does not start. Refer to [POWER SUPPLY AND GROUND CIRCUIT CHECK [COMBINATION METER] ]. Replace combination meter if normal. Refer to [COMBINATION METER: REMOVAL AND INSTALLATION ].
scientia non olet · About LEMON Manuals