LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Repair Instructions >> Parking Brake Control: Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Parking Brake Control: Removal and Installation: Removal

  1. Disconnect the return spring from the equalizer.
  2. Remove the right and left rear cables from the equalizer.
  3. Remove the front cable nuts from underneath the vehicle.
  4. Remove the rear half of the center console. Refer to [CENTER CONSOLE ASSEMBLY: DISASSEMBLY AND ASSEMBLY ]
  5. Remove the four control lever assembly bolts, then remove the control lever assembly.
  6. Remove the front cable grommet from the control lever assembly.
  7. Remove the front cable to control lever assembly bolt.
  8. Remove the adjusting nut and discard, then remove the front cable.
    CAUTION: Do not reuse the adjusting nut, use a new adjusting nut for installation.
  9. Remove the rear disc rotors. Refer to [REAR BRAKE CALIPER AND DISC ROTOR: REMOVAL AND INSTALLATION ]
  10. Remove the left and right parking brake shoes, then disconnect the rear cables from the toggle levers.
  11. Remove the left and right rear cable bolts and nuts, then remove the left and right rear cables.
scientia non olet · About LEMON Manuals