Precaution for Brake System
- Recommended fluid is Genuine super heavy duty brake fluid or equivalent. Refer to [RECOMMENDED FLUIDS AND LUBRICANTS [FOR USA AND CANADA]
]. (United States and Canada) and [RECOMMENDED FLUIDS AND LUBRICANTS [FOR MEXICO]
] (Mexico).
- Do not reuse drained brake fluid.
- Be careful not to splash brake fluid on painted areas.
- To clean or wash all parts of master cylinder, disc brake caliper and wheel cylinder, use clean brake fluid.
- Do not use mineral oils such as gasoline or kerosene. They will ruin rubber parts of the hydraulic system.
- Use flare nut wrench when removing and installing brake tube.
Courtesy of SUZUKI OF AMERICA CORP.
- Always check tightening torque when installing brake lines.
- Before working, turn ignition switch to OFF and disconnect connectors for ABS actuator and electric unit (control unit) or battery negative terminal.
- Burnish the brake contact surfaces after refinishing or replacing drums or rotors, after replacing pads or linings, or if a soft pedal occurs at very low mileage.
WARNING:
- Clean dust on caliper and brake pad with a vacuum dust collector to minimize the hazard of airborne particles or other materials.