LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake Control System >> Repair Instructions >> Brake Master Cylinder: Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Master Cylinder: Removal and Installation: Removal

  1. Remove master cylinder reservoir cap.
  2. Disconnect the harness connector for the fluid level sensor.
  3. Disconnect the brake pipes from the master cylinder assembly.
  4. Remove brake pipes from the ABS actuator and electric unit (control unit).
  5. Remove the master cylinder assembly nuts and discard.
    CAUTION: Discard the nuts, do not reuse.
  6. Remove the master cylinder assembly and O-ring.
    CAUTION: Do not reuse O-ring.
scientia non olet · About LEMON Manuals