Sunroof Unit: Removal
CAUTION:
- Always work with a helper.
- When taking sunroof unit out, use shop cloths to protect the seats and trim from damage.
- After installing the sunroof unit and glass lid, be sure to check gap adjustment to ensure there is no malfunction.
- Remove headlining. Refer to [HEADLINING: REMOVAL AND INSTALLATION ]
- Remove the glass lid. Refer to GLASS LID REMOVAL AND INSTALLATION procedure in this section.
- Disconnect sunroof motor assembly, and remove the overhead console bracket (if equipped).
- Disconnect the drain hoses.
- Remove front sunroof unit nuts.
- Remove the rear sunroof bracket bolts.
- Remove the side bolts and the sunroof unit.
- Remove the sunshade from the rear end of the sunroof unit. Refer to SUNSHADE REMOVAL AND INSTALLATION procedure in this section