Front Door Glass: Removal and Installation: Removal
- Remove the front door finisher. Refer to
[DOOR FINISHER: REMOVAL AND INSTALLATION
]
- Position the vapor barrier aside.
- If equipped, temporarily reconnect the power window switch.
- For power windows, operate the power window switch to raise/lower the door window until the glass bolts can be seen.
Courtesy of SUZUKI OF AMERICA CORP.
- For manual windows, temporarily reinstall the window crank handle and lower the window until the glass bolts can be seen.
- Remove the glass bolts.
- While holding the door window, raise it at the rear and pull the glass out of the sash toward the outside of the door.
Courtesy of SUZUKI OF AMERICA CORP.