Diagnosis Procedure
Regarding Wiring Diagram information, refer to [REAR WINDOW DEFOGGER: WIRING DIAGRAM ].
DIAGNOSIS PROCEDURE
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | CHECK FUSES Check if any of the following fuses in the IPDM E/R are blown. Is the inspection result normal? |
GO TO 2 | If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse. |
| 2 | CHECK REAR WINDOW DEFOGGER RELAY POWER SUPPLY CIRCUIT
Is the inspection result normal? |
Replace IPDM E/R. Refer to [IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM): REMOVAL AND INSTALLATION ] | GO TO 3 |
| 3 | CHECK INTERMITTENT INCIDENT Check intermittent incident. Refer to [SERVICE INFORMATION FOR ELECTRICAL INCIDENT: INTERMITTENT INCIDENT ] Is the inspection result normal? |
Check the following.
|
Repair or replace the malfunctioning parts. |