Diagnosis Procedure
Regarding Wiring Diagram information, refer to [REAR WINDOW DEFOGGER: WIRING DIAGRAM ].
DIAGNOSIS PROCEDURE
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | CHECK POWER SUPPLY CIRCUIT
Is the inspection result normal? |
GO TO 2 | GO TO 3 |
| 2 | CHECK GROUND CIRCUIT
Is the inspection result normal? |
GO TO 4 | Repair or replace harness as necessary. |
| 3 | CHECK HARNESS CONTINUITY
Is the inspection result normal? |
GO TO 5 | Replace or repair harness. |
| 4 | CHECK FILAMENT Check filament. Refer to [Component Inspection ]. Is the inspection result normal? |
Refer to [SERVICE INFORMATION FOR ELECTRICAL INCIDENT: INTERMITTENT INCIDENT ] | Repair filament. Refer to [FILAMENT REPAIR ]. |
| 5 | CHECK INTERMITTENT INCIDENT Check intermittent incident. Refer to [SERVICE INFORMATION FOR ELECTRICAL INCIDENT: INTERMITTENT INCIDENT ] Is the inspection result normal? |
Check the following.
|
Repair or replace the malfunctioning parts. |