Component Function Check
DIAGNOSIS PROCEDURE CHART
| Step |
Action |
YES |
NO |
| 1 |
CHECK BATTERY SAVER OUTPUT/POWER SUPPLY FUNCTION
SDT
- Turn ignition switch ON.
- Turn each interior room lamp ON.
- Front room/map lamp assembly (if equipped)
- Vanity lamps (if equipped)
- Room lamp 2nd row
- Select "BATTERY SAVER" of BCM (BATTERY SAVER) active test item.
- While operating the test item, check that each interior room lamp turns ON/OFF.
OFF: Interior room lamp OFF
ON: Interior room lamp ON
Is the inspection result normal? |
Battery saver output/power supply circuit is normal. |
Refer to
[Diagnosis Procedure ]. |