LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine General Information & Diagnosis - Qr25DE (5 Of 5) >> ASCD Brake Switch Circuit Check >> Component Inspection >> ASCD Brake Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ASCD Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD brake switch harness connector.
  3. Check continuity between ASCD brake switch terminals 1 and 2 under the following conditions.
    Fig 1: Checking Continuity Between ASCD Brake Switch Terminals 1 And 2
    G06444380Courtesy of SUZUKI OF AMERICA CORP.
    CONTINUITY CHART

    Condition Continuity
    Brake pedal: Fully released Should exist
    Brake pedal: Slightly depressed Should not exist

    If NG, adjust ASCD brake switch installation, refer to BRAKE PEDAL INSPECTION AND ADJUSTMENT , and perform step  3 again.

scientia non olet · About LEMON Manuals