Removal and Replacement

M/T Oil: Changing

Draining

1) Start the engine and let it run to warm up the transmission.
2) Stop the engine. Remove the transmission drain plug and drain the oil.
3) Set a gasket on the drain plug and install it to the transmission. Tighten the drain plug to the specified torque. Refer to [Transmission Assembly: Disassembly and Assembly] Transmission Disassembly and Assembly.

CAUTION:
Do not reuse gasket.

Filling

1) Remove the filler plug. Fill with new oil until oil level reaches the specified limit near the filler plug hole as shown.





[Transmission Assembly: Disassembly and Assembly] [1][2]Maintenance [1][2]Maintenance





2) After refilling the oil, check oil level. Set a gasket to the filler plug, then install it to the transmission. Tighten the filler plug to the specified torque. Refer to Transmission Disassembly and Assembly.

CAUTION:
Do not reuse gasket.