Shift Control System Removal and Installation

Shift Control System: Removal and Installation

Removal

1) Remove instrument lower panel RH and glove box. Refer to [Instrument Lower Panel RH and Glove Box: Removal and Installation] Instrument Lower Panel RH and Glove Box.
2) Remove the center console. Refer to [Center Console Assembly: Exploded View] Center Console Assembly Exploded View.
3) Disconnect the following from the shift selector assembly.
- Shift selector control cable
- Key interlock cable
- Shift selector harness connector
4) Remove the shift selector assembly.
5) Remove the shift selector handle, if necessary.
6) Remove the position indicator, if necessary.

Installation

Installation is in the reverse order of removal.

- Install and adjust the shift selector control cable. Refer to [Shift Control System: Inspection and Adjustment] Procedures.
- Install and adjust the key interlock cable. Refer to [Key Interlock Cable: Removal and Installation] Key Interlock Cable Removal and Installation.