Diagnostic Procedure 6

Trouble Diagnosis without SDT

Diagnostic Procedure 6

Inspect SRS Malfunction Using "AIR BAG" Warning Lamp-Diagnosis Mode

NOTE:

SRS will not enter Diagnosis mode if no malfunction is detected in User mode.

1) Turn ignition switch ON.
2) After "AIR BAG" warning lamp lights for 7 seconds, turn ignition switch OFF within 1 second.
3) Wait more than 3 seconds.
4) Repeat steps 1 to 3 two more times (3 times total).
5) Turn ignition switch ON.

SRS is now in Diagnosis mode. Refer to [Diagnosis Sensor Unit: Trouble Diagnosis without SDT] Warning Lamp Flash Code Chart.