Removal and Installation

Air Cleaner and Air Duct: Removal and Installation

NOTE:

Add mating marks as necessary for easier installation.

Removal

1) Remove the breather hose from the air duct.
2) Disconnect MAF sensor.
3) Loosen the air duct clamps and remove the air duct.
4) Remove the air duct and resonator assembly bolts and remove air duct and resonator assembly.
- Remove resonator in fender lifting left fender protector, as necessary.
5) Remove air cleaner case.
6) Remove MAF sensor, if necessary.

Inspection after Removal

Inspect air duct and air duct and resonator assembly for cracks or tears.

- Replace air duct and air duct and resonator assembly, if necessary.

Installation

Installation is in the reverse order of removal.

- Align marks. Attach each joint. Tighten clamps firmly.
- Install air duct and resonator assembly to air cleaner case by aligning "LOCK-UNLOCK" upward.