Removal and Replacement

Headlamp: Removal and Installation

Front Combination Lamp

Removal

1) Position front fender protector aside. Refer to [Front Fender Protector: Removal and Installation] Front Fender Protector Removal and Installation.
2) For steel bumper, remove the front bumper upper valance. Refer to [Front Bumper: Removal and Installation] Service and Repair.
3) For plastic bumper, remove the front bumper assembly. Refer to [Front Bumper: Removal and Installation] Service and Repair.
4) Remove the front combination lamp bolts.
5) Disconnect the front combination lamp connector and remove front combination lamp.

Installation

Installation is in the reverse order of removal.

NOTE:

After installation, perform headlamp aiming adjustment. Refer to [Headlamp: Aiming Adjustment] Adjustments.