ID Registration Cannot Be Completed

ID Registration Cannot Be Completed

NOTE:

The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.

- Activate and display TPMS transmitter IDs
- Display tire pressure reported by the TPMS transmitter
- Read TPMS DTCs
- Register TPMS transmitter IDs

DIAGNOSTIC PROCEDURE

1. PERFORM ID REGISTRATION OF ALL TRANSMITTERS

Carry out ID registration of all transmitters. Refer to [ID Registration Procedure] Programming and Relearning.

Can ID registration of all transmitters be completed?
YES
Inspection End.
NO
GO TO [C1708 - C1711 Data from Transmitter Not Being Received] C1708.