Tightening Torque Specifications
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Transaxle oil level/filler plug | 27 | 2.8 | 20.0 |
| Transaxle oil drain plug | 35 | 3.6 | 26.0 |
| Back up lamp switch | 19 | 1.9 | 14.0 |
| Guide case bolt No. 1 | 23 | 2.3 | 17.0 |
| Guide case bolt No. 2 | 23 | 2.3 | 17.0 |
| Gear shift interlock bolt | 23 | 2.3 | 17.0 |
| Gear shift locating spring | 28 | 2.9 | 21.0 |
| Reverse gear shift lever bolt | 23 | 2.3 | 17.0 |
| Transaxle case bolt | 23 | 2.3 | 17.0 |
| Final gear bolt | 90 | 9.2 | 66.5 |
NOTE:
The specified tightening torque is described in the following.
GEAR SHIFT CONTROL LEVER AND CABLE COMPONENTS
MANUAL TRANSAXLE UNIT COMPONENTS
GEAR SHIFT AND SELECT SHAFT ASSEMBLY COMPONENTS
MANUAL TRANSAXLE ASSEMBLY COMPONENTS
DIFFERENTIAL COMPONENTS
GEAR SHIFT CONTROL LEVER AND CABLE COMPONENTS
MANUAL TRANSAXLE UNIT COMPONENTS
GEAR SHIFT AND SELECT SHAFT ASSEMBLY COMPONENTS
MANUAL TRANSAXLE ASSEMBLY COMPONENTS
DIFFERENTIAL COMPONENTS
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENERS INFORMATION .